Paver Installation Cost Calculator

Estimate the installed cost of a paver patio or walkway in concrete, brick or natural stone.

Your numbers
Your project

Estimated Cost

Enter your numbers above.

How it works

Installed paver prices published by EstimatorSuite, LawnLove and Homewyse run about $8 to $18 per square foot for concrete pavers, $13 to $27 for brick and $18 to $35 for natural stone. Those include pavers, base, sand and labor. Labor alone is cited at roughly $4 to $15 per square foot.

Patio-wide figures are similar: LawnStarter lists patios at $8 to $24 per square foot and Angi puts a typical patio at $2,000 to $5,800. Driveways run higher, at roughly $10 to $40 per square foot.

To price your own materials directly, use the Paver Calculator and Paver Base & Sand Calculator, then add labor.

Where these numbers come from

The formulas and default values in this calculator are based on:

These are planning estimates. Local conditions, product labels and your supplier or extension office come first.

Frequently asked questions

How much does a paver patio cost per square foot?

About $8 to $18 for concrete pavers, $13 to $27 for brick and $18 to $35 for natural stone, installed.

What share of paver cost is labor?

Published breakdowns put labor at roughly 30 to 40 percent, with pavers 30 to 40 percent, base 15 to 20 percent and equipment 5 to 10 percent. That split comes from one source.

Is a driveway more expensive than a patio?

Usually yes, because it needs a thicker base and stronger pavers. Published driveway figures run about $10 to $40 per square foot.

All LawnCalcs tools