Paver Calculator

Count how many pavers you need for a patio, walkway or path, with an allowance for cuts.

Your numbers
Your project

Pavers Needed

Enter your numbers above.

Use this area in…

How it works

Divide the area by the footprint of a single paver, or equivalently multiply by pavers per square foot. A 4 by 8 inch brick paver covers about 0.22 square feet, which is 4.5 pavers per square foot. A 12 by 12 inch paver is exactly 1 per square foot.

Always add an allowance for cuts, breakage and future repairs. Paver suppliers commonly recommend 5 to 10 percent for simple rectangles and 10 to 15 percent for curves, diagonals or complex patterns. The default here is 10 percent.

Pavers need a compacted base and a layer of bedding sand under them. The Paver Base & Sand Calculator sizes both for the same footprint.

Where these numbers come from

The formulas and default values in this calculator are based on:

These are planning estimates. Local conditions, product labels and your supplier or extension office come first.

Frequently asked questions

How many 4x8 pavers per square foot?

About 4.5. Each 4 by 8 inch paver covers roughly 0.22 square feet.

How much extra should I buy?

Typically 5 to 10 percent for straight runs and 10 to 15 percent for curves or patterns with many cuts.

Do the joint gaps change the count?

Slightly. Pavers with spacer lugs include the joint in their nominal size, so the per-square-foot figures here are close enough for ordering. Confirm with your supplier's coverage per pallet.

All LawnCalcs tools