Paver Base & Sand Calculator

Size the compacted gravel base and bedding sand layer for a paver patio, walkway or driveway.

Your numbers
Your project

Base Gravel

Enter your numbers above.

Use this area in…

How it works

Pavers sit on two layers: a compacted aggregate base and a thin bedding layer of sand. Base depth depends on the load. Many guides call for about 4 inches under a walkway or patio, 6 inches where soil is poor, and 8 to 12 inches under a driveway. The sand layer is typically about 1 inch after screeding.

The calculator multiplies your area by each depth, adds an allowance for the loose material compacting down, and converts to cubic yards and approximate tons (using about 1.4 tons per cubic yard for crushed base stone and 1.35 for sand).

Base material is usually a crushed stone with fines, sometimes sold as crusher run, paver base or dense-graded aggregate. Ask your supplier what they recommend locally.

Where these numbers come from

The formulas and default values in this calculator are based on:

These are planning estimates. Local conditions, product labels and your supplier or extension office come first.

Frequently asked questions

How thick should a paver base be?

About 4 inches for a patio or walkway, 6 inches where soil is soft or wet, and 8 to 12 inches for driveways. Cold climates may need more for frost.

How thick is the sand layer under pavers?

About 1 inch after screeding. Thicker sand can cause pavers to settle unevenly.

Should I use polymeric sand?

Polymeric sand goes between the pavers after they are laid, not under them. Coverage on a typical product is roughly 45 to 55 square feet per bag, so check the label.

All LawnCalcs tools