Plant Spacing Calculator

Count the plants needed to fill a bed at a given on-center spacing, in a grid or staggered layout.

Your numbers
Your project

Plants Needed

Enter your numbers above.

Use this area in…

Not sure which tree fits your space and climate? Take the Tree Finder.

Take the quiz

How it works

Spacing is measured on center, from the middle of one plant to the middle of the next. In a square grid each plant needs spacing squared; staggering rows into a triangular pattern lets you fit about 15 percent more plants in the same area, because each plant covers about 0.866 times the spacing squared.

Published extension guidance gives starting points: small groundcovers such as pachysandra and myrtle go in about 6 to 12 inches apart, juniper and cotoneaster groundcovers 24 to 36 inches, perennials roughly 18 to 36 inches, low hedges 18 to 24 inches, small shrubs 3 to 6 feet and medium shrubs 7 to 10 feet. The tag on your plant gives its mature size, which is the better guide.

The calculator shows a 10 percent spare count because a few plants usually fail or get damaged. Edge effects are ignored, so plant a little denser along borders.

Where these numbers come from

The formulas and default values in this calculator are based on:

These are planning estimates. Local conditions, product labels and your supplier or extension office come first.

Frequently asked questions

What does on-center spacing mean?

It is the distance from the center of one plant to the center of the next. Two plants with 12-inch on-center spacing have 12 inches between their stems.

How many plants fit in a square foot at 12 inch spacing?

One plant per square foot in a grid, or about 1.15 per square foot when staggered.

Should I plant at the tag spacing or closer?

The tag lists the plant's mature size. Planting at the tag spacing gives a full look in a few seasons; planting closer fills faster but may need thinning later.

All LawnCalcs tools